Test dosage: about 160G (270ML)
Shelling rate: ≥99%
Milled rice broken rate: glutinous rice ≤ 10%, glutinous rice ≤ 20%
Net weight: 15kg
Working voltage: AC220V±10%50HZ
Motor power: 850W
Working time: Default 30 seconds (10-90 seconds adjustable)
Time display method: Digital
Use the tutorial
1. Combine the heavy hammer: press down the release button on the heavy hammer, pull out the connecting rod from the ferroalloy handle, re-insert the heavy hammer into the end of the connecting rod, the release button of the weight must be aligned with the groove on the rod to fix the weight ;
2. Put in the rice: Take a full cup of rice (about 150G) with the sampling cup that comes with it, lift the pressure block, confirm the position of the sieve mesh is accurate, and pour the rice into the processing department.
3, put down the pressure block and heavy hammer: Put the pressure block down, use the front end of the combined weight connecting rod to hook the round hole on the processing part, the rod body presses in the pressure block groove (tips: adjust the weight in the connection The position on the pole can change the gravity applied to the pressure block to suit different rice varieties.)
4, set the working time: open the power switch, the default display time is 60 seconds (tips: the degree of whitening is basically proportional to the working time and the applied gravity), press the "ON" button, in Stop working at any time
5. After stop, check: When the countdown is over, the motor stops running. To ensure safety, after the motor is safely stopped, remove the heavy hammer and pressure block to observe the whitening of the rice. If it is not completely white, follow the steps above. Work again for a number of seconds
6, removal of debris: After completion of processing, pull out the drawer under the processing department, drain rice bran and other waste
7, out of rice: the drawer back to the processing department, the counterclockwise rotation of the sieve mesh 180 degrees, so that the white rice after the natural fall to the drawer, then press the point moving key key rice machine 1-2 seconds after the shutdown, To throw out the rice on the attached roller, then turn off the power switch
8. Finished rice process: Pull out the drawer, pour the polished rice into the attached polished rice sieve, sieve the impurities and observe the quality of the rice.
9. Clean up, rotate the screen 90 degrees in the clockwise direction, pull out the sieve mesh, use a small brush and wire brush to clean the processing department, sieve mesh, drawer, etc., place the sieve mesh and drawer separately and put them in place, ready for the next time jobs
whatsapp:
+8615827495590
my email :
love122440@163.com
You might also like
