The diameters of the film bend tester shafts were 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 25 and 32 mm, respectively.
The adjustment of the rotating handle should be greater than 17mm, and the gap should be 0.05mm when it is tightly attached to the test bar.
The lifting and lowering of the support plate components should be greater than 17mm, and the gap is allowed to be 0.1mm when the test bar is in close contact.
This instrument is suitable for samples with a thickness of 1.0mm or less.
Test environment and conditions: In order to make the results correct, the test should be carried out at a temperature of 23 ± 2 °C and a relative temperature of 50 ± 5%.
Net Weight:5.5 kg
Dimension:230 x 170 x 100 mm
Shipping Weight:7 kg